Wiki de grifon

Cette page est en lecture seule. Vous pouvez afficher le texte source, mais ne pourrez pas le modifier. Contactez votre administrateur si vous pensez qu'il s'agit d'une erreur.
Pour des cartes LSI/Adaptec (les perc dell quoi, HP c'est hpacucli qu'il faut utiliser).

Liste les disques :
```
root@hv02:~# megacli -pdlist -aALL

Adapter #0

Enclosure Device ID: 32
Slot Number: 0
Drive's position: DiskGroup: 0, Span: 0, Arm: 0
Enclosure position: N/A
Device Id: 0
WWN: 5000CCA00A707437
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 136.732 GB [0x11177330 Sectors]
Non Coerced Size: 136.232 GB [0x11077330 Sectors]
Coerced Size: 136.125 GB [0x11040000 Sectors]
Sector Size:  0
Firmware state: Online, Spun Up
Device Firmware Level: HPD6
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000cca00a707435
SAS Address(1): 0x0
Connected Port Number: 4(path0)
Inquiry Data: HP      DG0146FARVU     HPD6PCWZV6RE
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive:  Not Certified
Drive Temperature :38C (100.40 F)
PI Eligibility:  No
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No



Enclosure Device ID: 32
Slot Number: 1
Drive's position: DiskGroup: 0, Span: 0, Arm: 1
Enclosure position: N/A
Device Id: 1
WWN: 5000CCA000901567
Sequence Number: 17
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 136.732 GB [0x11177330 Sectors]
Non Coerced Size: 136.232 GB [0x11077330 Sectors]
Coerced Size: 136.125 GB [0x11040000 Sectors]
Sector Size:  0
Firmware state: Online, Spun Up
Device Firmware Level: HPDA
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000cca000901565
SAS Address(1): 0x0
Connected Port Number: 3(path0)
Inquiry Data: HP      DG146BAAJB      HPDAP4XK7GHA
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 3.0Gb/s
Link Speed: 3.0Gb/s
Media Type: Hard Disk Device
Drive:  Not Certified
Drive Temperature :42C (107.60 F)
PI Eligibility:  No
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 3.0Gb/s
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No
...
```

Enclosure ID : numéro du backplane
```
root@hv02:~# megacli -EncInfo -a0

    Number of enclosures on adapter 0 -- 1

    Enclosure 0:
    Device ID                     : 32
    Number of Slots               : 6
    Number of Power Supplies      : 0
    Number of Fans                : 0
    Number of Temperature Sensors : 0
    Number of Alarms              : 0
    Number of SIM Modules         : 0
    Number of Physical Drives     : 6
    Status                        : Normal
    Position                      : 0
    Connector Name                : Unavailable
    Enclosure type                : SES
    FRU Part Number               : N/A
    Enclosure Serial Number       : N/A
    ESM Serial Number             : N/A
    Enclosure Zoning Mode         : N/A
    Partner Device Id             : 65535

    Inquiry data                  :
        Vendor Identification     : DP
        Product Identification    : BACKPLANE
        Product Revision Level    : 1.07
        Vendor Specific           : 95Q00K2

Exit Code: 0x00
```

Détail sur le disque :
```
root@hv02:~# megacli -PDInfo -PhysDrv [32:1] -a0

Enclosure Device ID: 32
Slot Number: 1
Drive's position: DiskGroup: 0, Span: 0, Arm: 1
Enclosure position: N/A
Device Id: 1
WWN: 5000CCA000901567
Sequence Number: 17
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS

Raw Size: 136.732 GB [0x11177330 Sectors]
Non Coerced Size: 136.232 GB [0x11077330 Sectors]
Coerced Size: 136.125 GB [0x11040000 Sectors]
Sector Size:  0
Firmware state: Online, Spun Up
Device Firmware Level: HPDA
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000cca000901565
SAS Address(1): 0x0
Connected Port Number: 3(path0)
Inquiry Data: HP      DG146BAAJB      HPDAP4XK7GHA
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 3.0Gb/s
Link Speed: 3.0Gb/s
Media Type: Hard Disk Device
Drive:  Not Certified
Drive Temperature :42C (107.60 F)
PI Eligibility:  No
Drive is formatted for PI information:  No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 3.0Gb/s
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No

Exit Code: 0x00
```

Détails des arguments :
  * -PDInfo : Physical Disk Info
  * -PhysDrv [32:1] : Adresse du disque en question : 32 = enclosure ID, 1 = Slot Number
  * -a0 : Adresse du contrôleur

Ensuite, il faut passer le disque offline :
```
megacli -pdoffline -physdrv[32:1] -a0
```

Le marquer comme absent :
```
megacli -PDMarkMissing -physdrv[32:1] -a0
```

Préparer le disque pour le retirer :
```
megacli -PdPrpRmv -physdrv[32:1] -a0
```

Remplacer physiquement le disque et voir la progression du rebuild :
```
root@hv02:~# megacli -PDRbld -ShowProg -PhysDrv[32:1] -a0

Rebuild Progress on Device at Enclosure 32, Slot 1 Completed 20% in 5 Minutes.
```

**ATTENTION!** On ne peut pas mixer dans le même array du SAS et du SATA.